All the versions previously released - Revision history

Admin: /* future.dj pro (Mac/PC) */

2024-04-27T16:13:45Z

future.dj pro (Mac/PC)

← Older revision		Revision as of 16:13, 27 April 2024
Line 61:		Line 61:
	* version 2.1.13 (30-November-2023)		* version 2.1.13 (30-November-2023)
	** post-fader effects (the effects are applied after the signal passes the Volume faders and the Cross-fader) - this is very useful/nice sounding for effects such as Echo or Reverb (eg. apply Echo and then set the Volume to 0 or move the cross-fader to the other side);		** post-fader effects (the effects are applied after the signal passes the Volume faders and the Cross-fader) - this is very useful/nice sounding for effects such as Echo or Reverb (eg. apply Echo and then set the Volume to 0 or move the cross-fader to the other side);
	Important Note: if this is enabled (which is now the default) you can only hear the effects in the Master (speakers) output since the Monitor (headphones) output is PFL (pre-fader listening) so before the effects are applied; EQ and Gain are always processed pre-fader;		*** Important Note: if this is enabled (which is now the default) you can only hear the effects in the Master (speakers) output since the Monitor (headphones) output is PFL (pre-fader listening) so before the effects are applied; EQ and Gain are always processed pre-fader;
	** new setting: "Apply effects post-fader (instead of pre-fader)"		** new setting: "Apply effects post-fader (instead of pre-fader)"
	** soft take-over for controller knobs/sliders (with visual feedback - transparent/ghost cursor)		** soft take-over for controller knobs/sliders (with visual feedback - transparent/ghost cursor)

Admin: /* future.dj pro (Mac/PC) */

2024-04-27T16:13:01Z

future.dj pro (Mac/PC)

Admin: /* future.dj pro (Mac/PC) */

2024-04-27T16:11:58Z

future.dj pro (Mac/PC)

Admin: /* future.dj pro (Mac/PC) */

2024-04-27T16:11:07Z

future.dj pro (Mac/PC)

← Older revision		Revision as of 16:11, 27 April 2024
Line 2:		Line 2:
	* version 2.2.0 (27-April-2024)		* version 2.2.0 (27-April-2024)
	** SLIP mode for loops, hot cues, scratching, reverse, pause		** SLIP mode for loops, hot cues, scratching, reverse, pause
	- loops - all loops now act as loop rolls		*** loops - all loops now act as loop rolls
	- hot cue points - these act as momentary cue points (eg. only while the button/pad is being pressed)		*** hot cue points - these act as momentary cue points (eg. only while the button/pad is being pressed)
	- scratch - after scratching is complete the track will resume as if there was no scratch		*** scratch - after scratching is complete the track will resume as if there was no scratch
	- reverse - same as with scratch		*** reverse - same as with scratch
	- pause (with turntable stop effect)		*** pause (with turntable stop effect)
	** QUANTIZE / Snap-to-beat mode for Cues, Loops, searching through the track		** QUANTIZE / Snap-to-beat mode for Cues, Loops, searching through the track
	- this affects: loop auto/manual mode (snap-to-beat and size quantizing), cue set quantizing, seek (while playing) quantizing		- this affects: loop auto/manual mode (snap-to-beat and size quantizing), cue set quantizing, seek (while playing) quantizing

Admin: /* future.dj pro (Mac/PC) */

2024-04-27T16:10:04Z

future.dj pro (Mac/PC)

@@ Line 1: / Line 1: @@
 ==future.dj pro (Mac/PC)==
 * version 2.1.13 (30-November-2023)
 ** post-fader effects (the effects are applied after the signal passes the Volume faders and  the Cross-fader) - this is very useful/nice sounding for effects such as Echo or Reverb (eg. apply Echo and then set the Volume to 0 or move the cross-fader to the other side);

Admin: /* future.dj pro (Mac/PC) */

2023-11-30T15:13:47Z

future.dj pro (Mac/PC)

← Older revision		Revision as of 15:13, 30 November 2023
Line 9:		Line 9:
	** optimization improvements and bug-fixes		** optimization improvements and bug-fixes
	** BREAKING CHANGE: if you have your own/edited scripts: we have added a new parameter (timestamp) to: function messageReceived(uniqueId,status,channel,data1,data2,timestamp)		** BREAKING CHANGE: if you have your own/edited scripts: we have added a new parameter (timestamp) to: function messageReceived(uniqueId,status,channel,data1,data2,timestamp)
	** new skin actions (2 buttons): ~~deck_intrumental~~, deck_vocal		** new skin actions (2 buttons): deck_instrumental, deck_vocal
	** new controller/script actions: deckInstr, deckVocal, deckSetStem1..4, setDeckJogWheelParams, scratchDeckJWWithTimestamp, moveDeckJWWithTimestamp		** new controller/script actions: deckInstr, deckVocal, deckSetStem1..4, setDeckJogWheelParams, scratchDeckJWWithTimestamp, moveDeckJWWithTimestamp
	** new controller/script notifications: stemInstr, stemVocal, pitch, motorOn		** new controller/script notifications: stemInstr, stemVocal, pitch, motorOn

Admin: /* future.dj pro (Mac/PC) */

2023-11-30T15:13:10Z

future.dj pro (Mac/PC)

@@ Line 1: / Line 1: @@
 ==future.dj pro (Mac/PC)==
 * version 2.1.12 (10-October-2023)
 ** added new controller: Hercules DJControl Inpulse 300 MK2

Admin: /* future.dj pro (Mac/PC) */

2023-10-09T19:43:46Z

future.dj pro (Mac/PC)

← Older revision		Revision as of 19:43, 9 October 2023
Line 1:		Line 1:
	==future.dj pro (Mac/PC)==		==future.dj pro (Mac/PC)==
	* version 2.1.12 (09-October-2023)		* version 2.1.12 (10-October-2023)
	** added new controller: Hercules DJControl Inpulse 300 MK2		** added new controller: Hercules DJControl Inpulse 300 MK2
	** added new controller: Hercules DJControl Inpulse 200 MK2		** added new controller: Hercules DJControl Inpulse 200 MK2

Admin: /* future.dj pro (Mac/PC) */

2023-10-09T19:34:21Z

future.dj pro (Mac/PC)

← Older revision		Revision as of 19:34, 9 October 2023
Line 1:		Line 1:
	==future.dj pro (Mac/PC)==		==future.dj pro (Mac/PC)==
			* version 2.1.12 (09-October-2023)
			** added new controller: Hercules DJControl Inpulse 300 MK2
			** added new controller: Hercules DJControl Inpulse 200 MK2
			** added new controller: Hercules DJControl Mix
			** performance optimisations
			<br/>
	* version 2.1.11 (11-September-2023)		* version 2.1.11 (11-September-2023)
	** added new controller: Hercules DJ Control GLOW		** added new controller: Hercules DJ Control GLOW

Admin: /* future.dj pro (Mac/PC) */

2023-09-11T09:44:44Z

future.dj pro (Mac/PC)

← Older revision		Revision as of 09:44, 11 September 2023
Line 1:		Line 1:
	==future.dj pro (Mac/PC)==		==future.dj pro (Mac/PC)==
			* version 2.1.11 (11-September-2023)
			** added new controller: Hercules DJ Control GLOW
			** KSR (karaoke singers request): improved searching results
			** automatically assign controllers to different decks (needed especially for single-deck controllers)
			** you can view in Options -> Control which decks are assigned to which controllers
			** performance optimisations
			<br/>
	* version 2.1.10 (05-August-2023)		* version 2.1.10 (05-August-2023)
	** controller mappings improvements: Pioneer DDJ-1000, Pioneer DDJ-1000 SRT, Numark DJ2GO2 Touch, Numark MixTrack Platinum FX		** controller mappings improvements: Pioneer DDJ-1000, Pioneer DDJ-1000 SRT, Numark DJ2GO2 Touch, Numark MixTrack Platinum FX

← Older revision		Revision as of 16:13, 27 April 2024
Line 29:		Line 29:
	** turntable slow start/stop motor effect (0.0 - 5.0 seconds)		** turntable slow start/stop motor effect (0.0 - 5.0 seconds)
	** fuzzy key matching / key mixing - it will achieve key sync with minimal key/pitch shifting (none, +/-1 or +/-2 semitones max)		** fuzzy key matching / key mixing - it will achieve key sync with minimal key/pitch shifting (none, +/-1 or +/-2 semitones max)
	this allows key mixing with just a +/- 1 (or max +/- 2) semitones key shift; see https://www.digitaldjtips.com/fuzzy-keymixing-the-new-way-to-dj/		*** this allows key mixing with just a +/- 1 (or max +/- 2) semitones key shift; see https://www.digitaldjtips.com/fuzzy-keymixing-the-new-way-to-dj/
	** new controller: RANE Four		** new controller: RANE Four
	** added new Audio Routing options for Booth (output) and Record (input)		** added new Audio Routing options for Booth (output) and Record (input)
	** added software send/return FX ("RoutingInFx1Send" .. "RoutingInFx4Send", "RoutingOutFx1Return" .. "RoutingOutFx4Return")		** added software send/return FX ("RoutingInFx1Send" .. "RoutingInFx4Send", "RoutingOutFx1Return" .. "RoutingOutFx4Return")
	useful for external mixers (or controlleres with hardware DSP mixers) that allow for software processed FX (the external hardware sends us a signal to apply FX to, we process it and then we send it back)		*** useful for external mixers (or controlleres with hardware DSP mixers) that allow for software processed FX (the external hardware sends us a signal to apply FX to, we process it and then we send it back)
	** EQ is no longer applied for external mixer mode (so we don't double-EQ)		** EQ is no longer applied for external mixer mode (so we don't double-EQ)
	** cross-fading when looping or changing the current position (seek/search through the track) -- this sounds a LOT smoother		** cross-fading when looping or changing the current position (seek/search through the track) -- this sounds a LOT smoother
Line 42:		Line 42:
	** removed setting: "Use Slip mode for looping" (use true Slip mode now)		** removed setting: "Use Slip mode for looping" (use true Slip mode now)
	** modified setting: "Time-stretch quality" is now more granular and you choose between: Standard quality (fast), Better quality, Best quality (slow)		** modified setting: "Time-stretch quality" is now more granular and you choose between: Standard quality (fast), Better quality, Best quality (slow)
	** new setting: "Show audio peak load instead of average CPU load" --		** new setting: "Show audio peak load instead of average CPU load"
	This proves beneficial in diagnosing audio disruptions/overloads such as glitches, stutters, pops and clicks resulting from an excessively low latency setting, an overly high time-stretch quality setting, or simply an underperforming/slow computer.		*** This proves beneficial in diagnosing audio disruptions/overloads such as glitches, stutters, pops and clicks resulting from an excessively low latency setting, an overly high time-stretch quality setting, or simply an underperforming/slow computer.
	** removed setting: "Cutoff Filter Mode" - the filter is now always set to LowPass & HighPass		** removed setting: "Cutoff Filter Mode" - the filter is now always set to LowPass & HighPass
	** WASAPI improvements when resampling is needed (eg. the audio card is set at 48000 Hz and we need to resample from 44100 Hz)		** WASAPI improvements when resampling is needed (eg. the audio card is set at 48000 Hz and we need to resample from 44100 Hz)

← Older revision		Revision as of 16:11, 27 April 2024
Line 8:		Line 8:
	*** pause (with turntable stop effect)		*** pause (with turntable stop effect)
	** QUANTIZE / Snap-to-beat mode for Cues, Loops, searching through the track		** QUANTIZE / Snap-to-beat mode for Cues, Loops, searching through the track
	- this affects: loop auto/manual mode (snap-to-beat and size quantizing), cue set quantizing, seek (while playing) quantizing		*** this affects: loop auto/manual mode (snap-to-beat and size quantizing), cue set quantizing, seek (while playing) quantizing
	- from compatible controllers the Quantize function can be controlled per deck or globally (all decks)		*** from compatible controllers the Quantize function can be controlled per deck or globally (all decks)
	** brand-new time-stretching and pitch-shifting (courtesy of z-plane's Elastique Pro/Efficient)		** brand-new time-stretching and pitch-shifting (courtesy of z-plane's Elastique Pro/Efficient)
	** Loop rolls		** Loop rolls
Line 15:		Line 15:
	** Pitch Play		** Pitch Play
	** Markers: cue points and loops are now unified (merged) into 'markers' (that do both). Think of them as bookmarks or points of interest basically.		** Markers: cue points and loops are now unified (merged) into 'markers' (that do both). Think of them as bookmarks or points of interest basically.
	- markers can have custom colors and names (right click to edit them) - these are also displayed on compatbile controllers (eg. the RANE FOUR shows both the color and the name/text of a marker)		*** markers can have custom colors and names (right click to edit them) - these are also displayed on compatbile controllers (eg. the RANE FOUR shows both the color and the name/text of a marker)
	- right click no longer clears cue points (markers); you can still do it using the dedicated X (delete cue) button or by a long-press (a couple of seconds; this is disabled when in SLIP mode)		*** right click no longer clears cue points (markers); you can still do it using the dedicated X (delete cue) button or by a long-press (a couple of seconds; this is disabled when in SLIP mode)
	** PADs section with 8 pads mode selection (Markers, Loop Roll, Slicer, Slicer Loop, Sampler, Beat Jump, Pitch Play, Stems)		** PADs section with 8 pads mode selection (Markers, Loop Roll, Slicer, Slicer Loop, Sampler, Beat Jump, Pitch Play, Stems)
	** instant loops (with pre-selected value)		** instant loops (with pre-selected value)
	** fully manual loops - disable quantize and manually control the start and end/size of a loop (set the in and out points without snap-to-beat or quantize)		** fully manual loops - disable quantize and manually control the start and end/size of a loop (set the in and out points without snap-to-beat or quantize)
	** manual loop adjustment - when a loop is active you can adjust its left/in point, right/out point or move it left or right using the jog-wheel of a compatible controller or the user interface		** manual loop adjustment - when a loop is active you can adjust its left/in point, right/out point or move it left or right using the jog-wheel of a compatible controller or the user interface
	If a controller doesn't have dedicated loop adjustment buttons you can use Shift + Cue point 1,2,3 on a controller - NOTE: when NOT inside a loop this will delete the cue point being pressed (normal functionality)		***If a controller doesn't have dedicated loop adjustment buttons you can use Shift + Cue point 1,2,3 on a controller - NOTE: when NOT inside a loop this will delete the cue point being pressed (normal functionality)
	Shift + Cue 1 enables the left point (loop in) editing mode		***Shift + Cue 1 enables the left point (loop in) editing mode
	Shift + Cue 2 enables the right point (loop out) editing mode		***Shift + Cue 2 enables the right point (loop out) editing mode
	Shift + Cue 3 enables the position (moving) editing mode (eg. both left and right points (loop in + out) are moved thus moving the whole loop)		***Shift + Cue 3 enables the position (moving) editing mode (eg. both left and right points (loop in + out) are moved thus moving the whole loop)
	Use jog-wheel search/move mode to adjust the loop - keep Shift pressed and move the jog-wheel to the direction needed (and the amount needed) - when NOT inside a loop this will search/move through the track itself (normal functionality)		***Use jog-wheel search/move mode to adjust the loop - keep Shift pressed and move the jog-wheel to the direction needed (and the amount needed) - when NOT inside a loop this will search/move through the track itself (normal functionality)
	While it is a lot more cumbersome than using a controller, on the user interface itself you can also right-click on the loop -/+ (half/double loop) buttons to enable editing mode and then right-click on the loop </> (move loop) buttons to adjust the point		***While it is a lot more cumbersome than using a controller, on the user interface itself you can also right-click on the loop -/+ (half/double loop) buttons to enable editing mode and then right-click on the loop </> (move loop) buttons to adjust the point
	** turntable slow start/stop motor effect (0.0 - 5.0 seconds)		** turntable slow start/stop motor effect (0.0 - 5.0 seconds)
	** fuzzy key matching / key mixing - it will achieve key sync with minimal key/pitch shifting (none, +/-1 or +/-2 semitones max)		** fuzzy key matching / key mixing - it will achieve key sync with minimal key/pitch shifting (none, +/-1 or +/-2 semitones max)